TLC Plates
Sorbent Technologies Inc Silica G TLC Plates, w/UV254, glass backed, 250um, 10x20cm, 50/pk
"Silica G" is a standard grade, unmodified Silica 60 with a surface area of 500 m2/g, mean pore size of 60A, specific pore volume of 0.75 ml/g, and particle size of 5-17um. The TLC plates contain UV254 fluorescent indicator. This analytical soft layer is bound to a glass support. It has a thickness of 250um and dimensions of 10x20cm. There are 50 plates per pack.
Miles Scientific SILICA GEL G 2000UM 20X20CM (25 PLATES/BOX)
Preparative TLC plates have adsorbent layers thicker than the 250 micron layers normally used for analytical separations. Thus, preparative plates can be used for separation of larger quantities of materials. The loading capacity for a given degree of sample component resolution increases roughly as the square root of the increased adsorbent layer thickness. In preparative TLC, materials to be separated are often applied as long streaks rather than spots. After development, specific compounds may be recovered by scraping the adsorbent layers from the plate in the region of interest and eluting the separated material from the adsorbent using a strong solvent. Thicker layers for higher capacity -Full range of plate sizes ·Prep-scored option for convenient zone location - Available with preadsorbent sample loading zone - Calcium sulfate binder-soft later for easy scraping
Sorbent Technologies Inc Silica XHL TLC Plates, w/UV254, glass backed, 250um, 2.5x7.5cm, 500/pk
"Silica XHL" is a standard grade Silica 60 with a surface area of 500 m2/g, mean pore size of 60A, specific pore volume of 0.75 ml/g, and particle size of 5-17um. The TLC plates contain UV254 fluorescent indicator. This analytical extra hard layer is bound to a glass support. It has a thickness of 250um and dimensions of 2.5x7.5cm. There are 500 plates per pack. The layer has an outstanding hardness and is abrasion resistant due to an optimized binder system. The plate can be easily labeled with a lead pencil for clear identification. There is an increased separation efficiency due to an optimized particle size distribution. The UV254 fluorescent indicator has an increased brilliance and a low-noise background which results in a high suitability for trace analyses.
Sorbent Technologies Inc Silica XG TLC Plates, w/UV254, aluminum backed, 200um, 10x20cm, 20pk
"Silica XG" is a standard grade Silica 60 with a surface area of 500 m2/g, mean pore size of 60A, specific pore volume of 0.75 ml/g, and particle size of 5-17um. The TLC plates contain UV254 fluorescent indicator. This analytical soft layer is bound to an aluminum support. It has a thickness of 200um and dimensions of 10x20cm. There are 20 plates per pack. The Silica XG TLC Plate has outstanding wettability for precise colorization results, even with 100% aqueous detection reagents, and excellent separation efficiency and reproducibility from lot to lot. Cutting the plates is easy and reliable due to an optimized binder system. There is no flaking of silica gel layer. Binder: highly polymeric product, which is stable in almost all organic solvents and resistant towards aggressive visualization reagents; also completely stable in purely aqueous eluents.
Macherey-Nagel TLC polyerster sheets POLYGRAM SIL G UV254, 5x20 cm
POLYGRAM sheets SIL G/UV254 - size: 5 x 20 cm - pack of 50
Sigma Aldrich Fine Chemicals Biosciences HPTLC calibration mix in m
HPTLC HPTLC calibration mix in m
Macherey-Nagel TLC polyerster sheets POLYGRAM SIL G UV254, 4x8 cm
POLYGRAM sheets SIL G/UV254 - size: 4 x 8 cm - pack of 50
Bellco Glass, Inc. BTBII Recprocating Stainless Steel Tray,10x10"
This tray only fits the back-to-basics II reciprocating shaker units. Includes rubber mat with peg and grommet design. Customer must use this tray or 7677-31010 for reciprocating shaker units. MADE IN THE USA Size: 10"x10"
Sorbent Technologies Inc Silica G TLC Plates, w/UV254, glass backed, 250um, 20x20cm, 25/pk
"Silica G" is a standard grade, unmodified Silica 60 with a surface area of 500 m2/g, mean pore size of 60A, specific pore volume of 0.75 ml/g, and particle size of 5-17um. The TLC plates contain UV254 fluorescent indicator. This analytical soft layer is bound to a glass support. It has a thickness of 250um and dimensions of 10x20cm. There are 50 plates per pack.
Sorbent Technologies Inc Silica XHL TLC Plates, w/UV254, glass backed, 250um, 2.5x7.5cm, 100/pk
"Silica XHL" is a standard grade Silica 60 with a surface area of 500 m2/g, mean pore size of 60A, specific pore volume of 0.75 ml/g, and particle size of 5-17um. The TLC plates contain UV254 fluorescent indicator. This analytical extra hard layer is bound to a glass support. It has a thickness of 250um and dimensions of 2.5x7.5cm. There are 100 plates per pack. The layer has an outstanding hardness and is abrasion resistant due to an optimized binder system. The plate can be easily labeled with a lead pencil for clear identification. There is an increased separation efficiency due to an optimized particle size distribution. The UV254 fluorescent indicator has an increased brilliance and a low-noise background which results in a high suitability for trace analyses.
Sorbent Technologies Inc Silica XG TLC Plates, aluminum backed, 200um, 20x20cm, 25pk
"Silica XG" is a standard grade Silica 60 with a surface area of 500 m2/g, mean pore size of 60A, specific pore volume of 0.75 ml/g, and particle size of 5-17um. This analytical soft layer is bound to an aluminum support. It has a thickness of 200um and dimensions of 20x20cm. There are 25 plates per pack. The Silica XG TLC Plate has outstanding wettability for precise colorization results, even with 100% aqueous detection reagents, and excellent separation efficiency and reproducibility from lot to lot. Cutting the plates is easy and reliable due to an optimized binder system. There is no flaking of silica gel layer. Binder: highly polymeric product, which is stable in almost all organic solvents and resistant towards aggressive visualization reagents; also completely stable in purely aqueous eluents.
Macherey-Nagel TLC glass plates SIL G-25, 20x20 cm
TLC precoated plates SIL G-25 - size: 20x20 cm - pack of 25
Sorbent Technologies Inc Silica N HR TLC Plates, w/UV254, polyester backed, 200um, 5x20cm, 50/pk
"Silica N HR" is a high purity Silica 60 with a surface area of 500 m2/g, mean pore size of 60A, specific pore volume of 0.75 ml/g, and particle size of 5-17um. The TLC plates contain UV254 fluorescent indicator. This analytical soft layer is bound to a plastic support. It has a thickness of 200um and dimensions of 5x20cm. There are 50 plates per pack.